1.5 KiB
Rayforge JCZ negative safety cases
- Date: 2026-10-18
- Rayforge commit:
c28918c87f8273dd1d244f5a057addc192807fa5 - Scope: fail-closed encoder boundary, no discovery or transport
Result
The transport-free JCZ semantic encoder rejected all six synthetic negative cases before producing output:
| Case | Rejection |
|---|---|
| Profile mismatch | Encoder profile identity did not match the required identity |
| Out-of-field geometry | Coordinate exceeded the synthetic 110 mm field |
| Power above one | Power was outside the Rayforge 0..1 fraction |
| Zero frequency | Frequency was not positive |
| Zero pulse width | Pulse width was not positive |
| Unsupported command | A synthetic CUSTOM Ops command had no explicit mapping |
Two runs produced identical results with SHA-256
0adab8fb1060fde1e172c674da3d0d4ae5936b01490891b898f86cc4f7ca3c3f.
The checked result is tests/fixtures/rayforge-jcz-negative-cases.json.
Boundary
The profile identifier and 110 mm field are explicitly synthetic. This test does not claim the actual machine, lens or correction identity. It proves only that the encoder boundary can require exact identity and reject mismatches without guessing values.
The current validations are intentionally narrower than a production policy. Real minimum/maximum frequency and pulse-width limits require verified source and machine evidence. Until then, the spike rejects non-positive values but does not invent an upper limit.
No controller discovery, USB access, motion, framing or emission occurred.